[an error occurred while processing this directive][an error occurred while processing this directive]

atm-l2circuit-mode

Syntax

atm-l2circuit-mode (cell | aal5 | trunk trunk);

Hierarchy Level

[edit chassis fpc slot-number pic pic-number],[edit chassis lcc number fpc slot-number pic pic-number] (Routing Matrix)

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure the ATM2 intelligent queuing (IQ) Layer 2 circuit transport mode.

Default

aal5

Options

aal5—Tunnel a stream of ATM cells encoded with ATM Adaptation Layer (AAL5) over an IP Multiprotocol Label Switching (MPLS) backbone.

cell—Tunnel a stream of ATM cells over an IP MPLS backbone.

trunk trunk—Transport ATM cells over an MPLS core network that is implemented on some other vendor switches. Trunk mode can be UNI or NNI.

Note: To determine which vendors support Layer 2 circuit trunk mode, contact Juniper Networks Customer Support.

 

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-04-26

[an error occurred while processing this directive]