[an error occurred while processing this directive][an error occurred while processing this directive]



accept (dhcp-v4 | inet);

Hierarchy Level

[edit interfaces interface-name auto-configure stacked-vlan-ranges dynamic-profile profile-name],[edit interfaces interface-name auto-configure vlan-ranges dynamic-profile profile-name]

Release Information

Statement introduced in JUNOS Release 9.5.

dhcp-v4 option added in JUNOS Release 10.0.


Specify the type of VLAN Ethernet packet accepted by an interface that is associated with a VLAN dynamic profile or stacked VLAN dynamic profile.


dhcp-v4—IPv4 DHCP packet type. Specifies that incoming IPv4 DHCP discover packets trigger the authentication of a VLAN as it is dynamically created.

Note: The DHCP-specific mac-address and option-82 options are rejected if the accept statement is not set to dhcp-v4.

inet—IPv4 Ethernet and ARP packet type.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Published: 2010-04-20

[an error occurred while processing this directive]