[an error occurred while processing this directive][an error occurred while processing this directive]

accept-data

Syntax

(accept-data | no-accept-data);

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family (inet | inet6) address address (vrrp-group | vrrp-inet6-group) group-id],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family (inet | inet6) address address (vrrp-group | vrrp-inet6-group) group-id]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

In a Virtual Router Redundancy Protocol (VRRP) configuration, determine whether or not an interface accepts packets destined for the virtual IP address:

  • accept-data—Enable the interface to accept packets destined for the virtual IP address.
  • no-accept-data—Prevent the interface from accepting packets destined for the virtual IP address.

Default

If the accept-data statement is not configured, the master router responds to Internet Control Message Protocol (ICMP) message requests only.

Usage Guidelines

See Configuring an Interface to Accept Packets Destined for the Virtual IP Address.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.


Published: 2010-01-13

[an error occurred while processing this directive]