[an error occurred while processing this directive][an error occurred while processing this directive]

Example: Preventing Translation of Specific Addresses

The following configuration specifies that network address translation is not performed on incoming traffic from the source address 192.168.20.24/32. Dynamic NAT is performed on all other incoming traffic.

[edit services nat]pool my-pool {address-range low 10.10.10.1 high 10.10.10.16;port-automatic;}rule src-nat {match-direction input;term t0 {from {source-address 192.168.20.24/32;}then {no-translation;}}term t1 {then {translated {translation-type source dynamic;source-pool my-pool;}}}}

Published: 2010-04-28

[an error occurred while processing this directive]