[an error occurred while processing this directive][an error occurred while processing this directive]

Examples: Configuring Static Filters

This topic provides some static filter configuration examples.

firewall {policer p1 {if-exceeding {bandwidth-limit 5m;burst-size-limit 10m;}then discard;}family inet {filter dfwd {interface-specific;term 1 {from {source-address {192.1.1.0/24;}}then {count c1;next term;}}term 2 {from {source-address {192.2.1.0/24;}}then count c2;}term 3 {then accept;}}filter dfwd1 {interface-specific;term 1 {from {address {192.1.1.0/24;}}then {discard;}}}filter tos {interface-specific;term 1 {from {precedence priority;}then forwarding-class assured-forwarding;}term 2 {then {log;accept;}}}filter dfwd2 {interface-specific;term 1 {from {forwarding-class best-effort;}then {sample;forwarding-class expedited-forwarding;}}term 2 {then accept;}}filter nodhcp {term dhcpdiscover {from {protocol udp;source-port 68;destination-port 67;}then {discard;}}term others {then accept;}}filter p1 {interface-specific;term 1 {from {precedence priority;}then {policer p1;log;}}term 2 {then accept;}}filter dscp {interface-specific;term 1 {from {dscp af11;}then log;}term 2 {then accept;}}filter tcm {interface-specific;term 1 {from {dscp af11;}then policer p1;}term 2 {then accept;}}}traceoptions {flag dynamic;}}

Published: 2010-04-15

[an error occurred while processing this directive]