[an error occurred while processing this directive][an error occurred while processing this directive]

Example: Configuring Static Source Translation with Multiple Prefixes and Address Ranges

The following configuration creates a static pool with an address prefix and an address range and uses static source NAT translation.

[edit services nat]pool p1 {address 30.30.30.252/30;address-range low 20.20.20.1 high 20.20.20.2;}rule r1 {match-direction input;term {from {source-address {10.10.10.252/30;}}then {translated {source-pool p1;translation-type source static;}}}}

Published: 2010-04-28

[an error occurred while processing this directive]