[an error occurred while processing this directive][an error occurred while processing this directive]

Example: Configuring an SSM-Only Domain

Deploying an SSM-only domain is much simpler than deploying an ASM domain; it only requires a few configuration steps. Enable PIM sparse mode on all interfaces by adding the mode statement at the [edit protocols pim interface all] hierarchy level. When configuring all interfaces, exclude the fxp0.0 management interface by adding the disable statement for that interface. Then configure IGMPv3 on all host-facing interfaces by adding the version statement at the [edit protocols igmp interface interface-name] hierarchy level.

In the following example, the host-facing interface is fe-0/1/2:

[edit]protocols {pim {interface all {mode sparse;version 2;}interface fxp0.0 {disable;}}igmp {interface fe-0/1/2 {version 3;}}}

Published: 2010-04-16

[an error occurred while processing this directive]