Technical Documentation

Example: Configuring Ethernet Frame Delay Measurements with Untagged Interfaces

Ethernet frame delay measurements are supported on untagged interfaces. All commands are the same as for tagged interfaces. Only the configurations are different. This section shows the untagged interface configurations for Routers MX-1 and MX-2.

Note: These are not complete router configurations.

Untagged interface configuration for Router MX-1.

[edit]interfaces {ge-5/0/0 {unit 0;}ge-5/2/9 {unit 0;}}protocols {oam {ethernet {connectivity-fault-management {traceoptions {file eoam_cfm.log size 1g files 2 world-readable;flag all;}linktrace {path-database-size 255;age 10s;}maintenance-domain md6 {level 6;maintenance-association ma6 {continuity-check {interval 100ms;hold-interval 1;}mep 201 {interface ge-5/0/0;direction down;auto-discovery;}}}}}}}

Untagged interface configuration for Router MX-2.

[edit]interfaces {ge-0/2/2 {unit 0;}ge-0/2/5 {unit 0;}}protocols {oam {ethernet {connectivity-fault-management {traceoptions {file eoam_cfm.log size 1g files 2 world-readable;flag all;}linktrace {path-database-size 255;age 10s;}maintenance-domain md6 {level 6;maintenance-association ma6 {continuity-check {interval 100ms;hold-interval 1;}mep 101 {interface ge-0/2/2;direction down;auto-discovery;}}}}}}}

Published: 2010-04-12