[an error occurred while processing this directive][an error occurred while processing this directive]

Example: Creating and Applying Configuration Groups on a TX Matrix Router

The following example shows how to configure and apply configuration groups on a TX Matrix Router:

[edit]groups {re0 { # Routing Engine 0 on TX Matrix routersystem {host-name <host-name>;backup-router <ip-address>;}interfaces {fxp0 {unit 0 {family inet {address <ip-address>;}}}}}re1 { # Routing Engine 1 on TX Matrix routersystem {host-name <host-name>;backup-router <ip-address>;}interfaces {fxp0 {unit 0 {family inet {address <ip-address>;}}}}lcc0-re0 { # Routing Engine 0 on T640 router numbered 0 system {host-name <host-name>;backup-router <ip-address>;}interfaces {fxp0 {unit 0 {family inet {address <ip-address>;}}}lcc0-re1 { # Routing Engine 1 on T640 router numbered 0 system {host-name <host-name>;backup-router <ip-address>;}interfaces {fxp0 {unit 0 {family inet {address <ip-address>;}}}}apply-groups [ re0 re1 lcc0-re0 lcc0-re1 ];}

Published: 2010-04-27

[an error occurred while processing this directive]