[an error occurred while processing this directive][an error occurred while processing this directive]

Example: Configuring an ATM-over-SHDSL Interface

The following example illustrates an ATM-over-SHDSL interface configuration.

Configuration for the ATM Mode on the PIM

[edit chassis]fpc 6 {pic 0 {shdsl {pic-mode 2-port-atm;}}}

Configuration for the SHDSL Operating Mode on the Physical ATM Interface

[edit interfaces at-6/0/0/0]shdsl-options {annex annex-b;line-rate 192;loopback local;snr-margin {current 1;snext 2;}}

Configuration for the Encapsulation on the Physical ATM Interface

[edit interfaces at-6/0/0/0]encapsulation ethernet-over-atm;

Configuration for the Logical Interface

[edit interfaces at-6/0/0/0 unit 3]encapsulation atm-nlpid;family inet {vci 25;}

Published: 2010-04-20

[an error occurred while processing this directive]