[an error occurred while processing this directive][an error occurred while processing this directive]

Example: Configuring a TCC

Configure a full-duplex switching translational cross-connect with PPP TCC encapsulation between Router A and Router C, using a Juniper Networks router, Router B, as the virtual switch. See the topology in Figure 1.

In this topology, Router B has a PPP connection to Router A and an ATM connection to Router C.

Figure 1: Layer 2.5 Switching Translational Cross-Connect

Image g017013.gif

On Router A

[edit]interfaces {so-0/1/0 {description "to Router B so-1/0/0";encapsulation ppp;unit 0 {family inet {address 10.1.1.1/30;}}}}

On Router B

[edit]interfaces {so-1/0/0 {description "to Router A so-0/1/0";encapsulation ppp-tcc;unit 0 {}}at-1/1/0 {description "to Router C at-0/3/0";atm-options {vpi 0 maximum-vcs 2000;}unit 32 {vci 32;encapsulation atm-tcc-vc-mux;}}}[edit]protocols {mpls {interface so-1/0/0.0;interface at-1/1/0.32;}connections {interface-switch PPP-to-ATM {interface so-1/0/0.0;interface at-1/1/0.32;}}}

On Router C

[edit]interfaces {at-0/3/0 {description "to Router B at-1/1/0";atm-options {vpi 0 maximum-vcs 2000;}unit 32 {vci 32;encapsulation atm-vc-mux;family inet {address 10.1.1.2/30;}}}}

Published: 2010-04-20

[an error occurred while processing this directive]