[an error occurred while processing this directive][an error occurred while processing this directive]

SONET APS MIB

The Juniper Networks enterprise-specific SONET Automatic Protection Switching (APS) MIB monitors any SONET interface that participates in APS. APS is used by SONET add/drop multiplexers (ADMs) to protect against circuit failures. The JUNOS Software implementation of APS allows you to protect against circuit failures between an ADM and one or more routers, and between multiple interfaces in the same router. When a circuit or router fails, a backup immediately takes over. For more information about APS, see the JUNOS Network Interfaces Configuration Guide.

Note: JUNOS Software supports only read access, 1+1 architecture, bidirectional, revertive, and nonrevertive mode.

For a downloadable version of this MIB, see https://www.juniper.net/techpubs/en_US/junos10.2/information-products/ topic-collections/config-guide-network-mgm/mib-jnx-sonetaps.txt .

For information about the enterprise-specific SONET APS MIB objects, see the following topics:


Published: 2010-04-27

[an error occurred while processing this directive]