--
-- Juniper Enterprise Specific MIB: TraceRoute MIB
-- 
-- Copyright (c) 2001-2003, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--

JUNIPER-TRACEROUTE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI              -- RFC2578
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB      -- RFC2571
    DisplayString
        FROM SNMPv2-TC
    jnxMibs
        FROM JUNIPER-SMI;

jnxTraceRouteMIB MODULE-IDENTITY
    LAST-UPDATED "200307182154Z" -- Fri Jul 18 21:54:03 2003 UTC
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
            "        Juniper Technical Assistance Center
		     Juniper Networks, Inc.
		     1194 N. Mathilda Avenue
		     Sunnyvale, CA 94089
		     E-mail: support@juniper.net"

    DESCRIPTION
            "This is Juniper Networks' implementation of enterprise specific
             portions of traceRouteMib.  Any data stored in this MIB has
             directly related entries in mib-2, traceRouteMIB."
    ::= { jnxMibs 8 }


jnxTraceRouteObjects      OBJECT IDENTIFIER ::= { jnxTraceRouteMIB 1 }

jnxTraceRouteCtlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF JnxTraceRouteCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines the jnxTraceRoute Control Table for providing enterprise
         specific options to the corresponding traceRouteCtlTable entry."
   ::= { jnxTraceRouteObjects 2 }

jnxTraceRouteCtlEntry OBJECT-TYPE
    SYNTAX      JnxTraceRouteCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the jnxTraceRouteCtlTable.  The first index
         element, jnxTraceRouteCtlOwnerIndex, is of type SnmpAdminString, a
         textual convention that allows for use of the SNMPv3 View-Based Access
         Control Model (RFC 2575 [11], VACM) and allows an management
         application to identify its entries.  The second index,
         jnxTraceRouteCtlTestName (also an SnmpAdminString), enables the same
         management application to have multiple outstanding requests.
         Entries are created in the traceRouteCtlTable and mirrored here."
    INDEX {
             jnxTRCtlOwnerIndex,
             jnxTRCtlTestName
          }
    ::= { jnxTraceRouteCtlTable 1 }

JnxTraceRouteCtlEntry ::=
    SEQUENCE {
        jnxTRCtlOwnerIndex             SnmpAdminString,
        jnxTRCtlTestName               SnmpAdminString,
        jnxTRCtlIfName                 DisplayString,
        jnxTRCtlRoutingInstanceName    DisplayString
    }

jnxTRCtlOwnerIndex OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "To facilitate the provisioning of access control by a
       security administrator using the View-Based Access
       Control Model (RFC 2575, VACM) for tables in which
       multiple users may need to independently create or
       modify entries, the initial index is used as an 'owner
       index'.  Such an initial index has a syntax of
       SnmpAdminString, and can thus be trivially mapped to a
       securityName or groupName as defined in VACM, in
       accordance with a security policy.

       When used in conjunction with such a security policy all
       entries in the table belonging to a particular user (or
       group) will have the same value for this initial index.
       For a given user's entries in a particular table, the
       object identifiers for the information in these entries
       will have the same subidentifiers (except for the 'column'
       subidentifier) up to the end of the encoded owner index.
       To configure VACM to permit access to this portion of the
       table, one would create vacmViewTreeFamilyTable entries
       with the value of vacmViewTreeFamilySubtree including
       the owner index portion, and vacmViewTreeFamilyMask
       'wildcarding' the column subidentifier.  More elaborate
       configurations are possible."
    ::= { jnxTraceRouteCtlEntry 1 }

jnxTRCtlTestName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The name of the traceRoute test.  This is locally unique, within
        the scope of an traceRouteCtlOwnerIndex."
    ::= { jnxTraceRouteCtlEntry 2 }

jnxTRCtlIfName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..24))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Setting this object to an interface name prior to starting a remote
        traceRoute operation directs the traceRoute probes to be transmitted
        over the specified interface.  To specify the interface index instead,
        see traceRouteCtlIfIndex.  The interface name must be specified under
        interfaces statement of the JUNOS configuration.  A zero length string
        value for this object means that this option is not enabled.  The 
        following values may be set simultaneously, however, only one value is
        used.  The precedence order is a follows:
            traceRouteCtlIfIndex (see traceRouteCtlTable in traceRouteMIB)
            jnxTRCtlIfName
            jnxTRCtlRoutingInstanceName"
    DEFVAL { ''H }
    ::= { jnxTraceRouteCtlEntry 3 }

jnxTRCtlRoutingInstanceName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Use this option to specify the name of the routing instance used when
        directing outgoing traceRoute packets.  The instance name specified
        must be configured under routing-instances of the JUNOS configuration."
    DEFVAL { ''H }
    ::= { jnxTraceRouteCtlEntry 4 }
END