-- -- Juniper Enterprise Specific MIB: Service PIC MIB -- -- Copyright (c) 2003, 2005-2006, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-SP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32, NOTIFICATION-TYPE, OBJECT-IDENTITY FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC ifIndex, InterfaceIndex FROM IF-MIB jnxMibs, jnxSpNotifications FROM JUNIPER-SMI; jnxSpMIB MODULE-IDENTITY LAST-UPDATED "200504050000Z" -- Apr 5, 2005 ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "Provides data about each of the AS Pics on a router." -- revision history REVISION "200504020000Z" DESCRIPTION "Initial revision." ::= { jnxMibs 32 } -- -- Per Service Set information -- jnxSpSvcSet OBJECT-IDENTITY STATUS current DESCRIPTION "Information about Service PIC Service Sets." ::= { jnxSpMIB 1 } jnxSpSvcSetTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSpSvcSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data about each service set on each Service PIC on the router." ::= { jnxSpSvcSet 1 } jnxSpSvcSetEntry OBJECT-TYPE SYNTAX JnxSpSvcSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry provides information about a single Service Set. The Service Set is identified by its name and the Service PIC the Service Set is configured on is identified by jnxSpSvcSetIfName." INDEX { jnxSpSvcSetName } ::= { jnxSpSvcSetTable 1 } JnxSpSvcSetEntry ::= SEQUENCE { jnxSpSvcSetName DisplayString, jnxSpSvcSetSvcType DisplayString, jnxSpSvcSetTypeIndex Integer32, jnxSpSvcSetIfName DisplayString, jnxSpSvcSetIfIndex InterfaceIndex, jnxSpSvcSetMemoryUsage Gauge32, jnxSpSvcSetCpuUtil Gauge32, jnxSpSvcSetSvcStyle INTEGER, jnxSpSvcSetMemLimitPktDrops Counter32, jnxSpSvcSetCpuLimitPktDrops Counter32, jnxSpSvcSetFlowLimitPktDrops Counter32 } jnxSpSvcSetName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..96)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Service Set name." ::= { jnxSpSvcSetEntry 1 } jnxSpSvcSetSvcType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the Service Type associated with this table entry." ::= { jnxSpSvcSetEntry 2 } jnxSpSvcSetTypeIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "A generic integer used to identify the Service Type for this entry." ::= { jnxSpSvcSetEntry 3 } jnxSpSvcSetIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ifName of the interface identifying the Service PIC. If more than one interface is associated with the Service PIC, the name associated with the lowest layer interface is used for this object." ::= { jnxSpSvcSetEntry 4 } jnxSpSvcSetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex corresponding to jnxSpSvcSetIfName." ::= { jnxSpSvcSetEntry 5 } jnxSpSvcSetMemoryUsage OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of memory used by this Service Set, expressed in bytes." ::= { jnxSpSvcSetEntry 6 } jnxSpSvcSetCpuUtil OBJECT-TYPE SYNTAX Gauge32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of CPU used by this Service Set, expressed as a percentage of the total." ::= { jnxSpSvcSetEntry 7 } jnxSpSvcSetSvcStyle OBJECT-TYPE SYNTAX INTEGER { unknown (1), interface-service (2), next-hop-service (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this Service Set. The definitions of each style being: Unknown - Service style is not known. Interface-service - Service style is interface based. Next-hop-service - Service style is next-hop based." ::= { jnxSpSvcSetEntry 8 } jnxSpSvcSetMemLimitPktDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped due to the Service Set exceeding its memory limits (when in Red Zone)." ::= { jnxSpSvcSetEntry 9 } jnxSpSvcSetCpuLimitPktDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped due to the Service Set exceeding the average cpu limits (when total exceeds 85%)." ::= { jnxSpSvcSetEntry 10 } jnxSpSvcSetFlowLimitPktDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped due to the Service Set exceeding the flow limit." ::= { jnxSpSvcSetEntry 11 } -- -- Per Service information -- jnxSpSvcSetSvcTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSpSvcSetSvcTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data about each service on each Service PIC on the router." ::= { jnxSpSvcSet 2 } jnxSpSvcSetSvcTypeEntry OBJECT-TYPE SYNTAX JnxSpSvcSetSvcTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry provides information about a single Service on each Service PIC. Each Service PIC is identified by its corresponding ifIndex, while each Service is identified by jnxSpSvcSetSvcTypeIndex. The Service Type associated with this index is provided by jnxSpSvcSetSvcTypeName." INDEX { ifIndex, jnxSpSvcSetSvcTypeIndex } ::= { jnxSpSvcSetSvcTypeTable 1 } JnxSpSvcSetSvcTypeEntry ::= SEQUENCE { jnxSpSvcSetSvcTypeIndex Integer32, jnxSpSvcSetSvcTypeIfName DisplayString, jnxSpSvcSetSvcTypeName DisplayString, jnxSpSvcSetSvcTypeSvcSets Gauge32, jnxSpSvcSetSvcTypeMemoryUsage Gauge32, jnxSpSvcSetSvcTypePctMemoryUsage Gauge32, jnxSpSvcSetSvcTypeCpuUtil Gauge32 } jnxSpSvcSetSvcTypeIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A generic integer used to identify the Service Type for this entry." ::= { jnxSpSvcSetSvcTypeEntry 1 } jnxSpSvcSetSvcTypeIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ifName of the interface identifying the Service PIC. If more than one interface is associated with the Service PIC, the name associated with the lowest layer interface is used for this object." ::= { jnxSpSvcSetSvcTypeEntry 2 } jnxSpSvcSetSvcTypeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the Service Type associated with this table entry." ::= { jnxSpSvcSetSvcTypeEntry 3 } jnxSpSvcSetSvcTypeSvcSets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Service Sets configured on this Service PIC that use this service type." ::= { jnxSpSvcSetSvcTypeEntry 4 } jnxSpSvcSetSvcTypeMemoryUsage OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of memory used by this Service Type, expressed in bytes." ::= { jnxSpSvcSetSvcTypeEntry 5 } jnxSpSvcSetSvcTypePctMemoryUsage OBJECT-TYPE SYNTAX Gauge32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of memory used by this Service Type, expressed as a percentage of the total." ::= { jnxSpSvcSetSvcTypeEntry 6 } jnxSpSvcSetSvcTypeCpuUtil OBJECT-TYPE SYNTAX Gauge32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of CPU used by this Service Type, expressed as a percentage of the total." ::= { jnxSpSvcSetSvcTypeEntry 7 } -- -- Per Interface information -- jnxSpSvcSetIfTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSpSvcSetIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Service Set data about each Service PIC on the router." ::= { jnxSpSvcSet 3 } jnxSpSvcSetIfEntry OBJECT-TYPE SYNTAX JnxSpSvcSetIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry provides Service Set information about a single Service PIC. Each Service PIC is identified by its corresponding ifIndex." INDEX { ifIndex } ::= { jnxSpSvcSetIfTable 1 } JnxSpSvcSetIfEntry ::= SEQUENCE { jnxSpSvcSetIfTableName DisplayString, jnxSpSvcSetIfSvcSets Gauge32, jnxSpSvcSetIfMemoryUsage Gauge32, jnxSpSvcSetIfPctMemoryUsage Gauge32, jnxSpSvcSetIfPolMemoryUsage Gauge32, jnxSpSvcSetIfPctPolMemoryUsage Gauge32, jnxSpSvcSetIfMemoryZone INTEGER, jnxSpSvcSetIfCpuUtil Gauge32 } jnxSpSvcSetIfTableName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ifName of the interface identifying the Service PIC. If more than one interface is associated with the Service PIC, the name associated with the lowest layer interface is used for this object." ::= { jnxSpSvcSetIfEntry 1 } jnxSpSvcSetIfSvcSets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Service Sets configured on this Service PIC." ::= { jnxSpSvcSetIfEntry 2 } jnxSpSvcSetIfMemoryUsage OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of memory used by this Service PIC, expressed in bytes." ::= { jnxSpSvcSetIfEntry 3 } jnxSpSvcSetIfPctMemoryUsage OBJECT-TYPE SYNTAX Gauge32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of memory used by this Service PIC, expressed as a percentage of the total." ::= { jnxSpSvcSetIfEntry 4 } jnxSpSvcSetIfPolMemoryUsage OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of policy memory used by this Service PIC, expressed in bytes." ::= { jnxSpSvcSetIfEntry 5 } jnxSpSvcSetIfPctPolMemoryUsage OBJECT-TYPE SYNTAX Gauge32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of policy memory used by this Service PIC, expressed as a percentage of the total." ::= { jnxSpSvcSetIfEntry 6 } jnxSpSvcSetIfMemoryZone OBJECT-TYPE SYNTAX INTEGER { green (1), yellow (2), orange (3), red (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The memory-usage zone currently occupied by this Service PIC. The definitions of each zone are: Green - All new flows are allowed. Yellow - Unused memory is reclaimed. All new flows are allowed. Orange - New flows are only allowed for service sets that are using less than their equal share of memory. Red - No new flows are allowed." ::= { jnxSpSvcSetIfEntry 7 } jnxSpSvcSetIfCpuUtil OBJECT-TYPE SYNTAX Gauge32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of CPU used by this Service PIC, expressed as a percentage of the total." ::= { jnxSpSvcSetIfEntry 8 } -- -- Service PIC Notification definitions -- jnxSpNotificationPrefix OBJECT-IDENTITY STATUS current DESCRIPTION "All collector notifications are registered under this branch." ::= { jnxSpNotifications 0 } jnxSpSvcSetZoneEntered NOTIFICATION-TYPE OBJECTS { jnxSpSvcSetIfMemoryZone, jnxSpSvcSetIfTableName } STATUS current DESCRIPTION "This indicates a Service PIC has entered a more severe memory-usage zone from a less severe memory usage zone. The zone entered is identified by jnxSpSvcSetIfMemoryZone." ::= { jnxSpNotificationPrefix 1 } jnxSpSvcSetZoneExited NOTIFICATION-TYPE OBJECTS { jnxSpSvcSetIfMemoryZone, jnxSpSvcSetIfTableName } STATUS current DESCRIPTION "This indicates a Service Pic has exited a more severe memory-usage zone to a less severe memory usage zone. The zone exited is identified by jnxSpSvcSetIfMemoryZone." ::= { jnxSpNotificationPrefix 2 } jnxSpSvcSetCpuExceeded NOTIFICATION-TYPE OBJECTS { jnxSpSvcSetIfCpuUtil, jnxSpSvcSetIfTableName } STATUS current DESCRIPTION "This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%)." ::= { jnxSpNotificationPrefix 3 } jnxSpSvcSetCpuOk NOTIFICATION-TYPE OBJECTS { jnxSpSvcSetIfCpuUtil, jnxSpSvcSetIfTableName } STATUS current DESCRIPTION "This indicates a Service Pic has crossed below its internal threshold for CPU utilization (85%)." ::= { jnxSpNotificationPrefix 4 } END