-- -- Juniper Enterprise Specific MIB: Reverse Path Forwarding MIB -- -- Copyright (c) 2002-2003, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-RPF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter64 FROM SNMPv2-SMI -- RFC 2578 InterfaceIndex FROM IF-MIB -- RFC 2863 jnxMibs FROM JUNIPER-SMI; jnxRpf MODULE-IDENTITY LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:59 2003 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO "Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "This is Juniper Networks' enterprise-specific MIB for Reverse Path Forwarding (RPF)" REVISION "200202250000Z" DESCRIPTION "Initial revision" ::= { jnxMibs 17 } jnxRpfStats OBJECT IDENTIFIER ::= { jnxRpf 1 } jnxRpfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxRpfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics for traffic that is rejected due to RPF processing." ::= { jnxRpfStats 1 } jnxRpfStatsEntry OBJECT-TYPE SYNTAX JnxRpfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table counts RPF-rejected traffic that is received on a particular interface and belongs to a particular address family." INDEX { jnxRpfStatsIfIndex, jnxRpfStatsAddrFamily } ::= { jnxRpfStatsTable 1 } JnxRpfStatsEntry ::= SEQUENCE { jnxRpfStatsIfIndex InterfaceIndex, jnxRpfStatsAddrFamily INTEGER, jnxRpfStatsPackets Counter64, jnxRpfStatsBytes Counter64 } jnxRpfStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ingress interface for traffic that is counted in this RpfStats entry." ::= { jnxRpfStatsEntry 1 } jnxRpfStatsAddrFamily OBJECT-TYPE SYNTAX INTEGER { ipv4 (1), ipv6 (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address family of this entry's traffic." ::= { jnxRpfStatsEntry 2 } jnxRpfStatsPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received on this interface, belonging to this address family, that have been rejected due to RPF processing." ::= { jnxRpfStatsEntry 3 } jnxRpfStatsBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received on this interface, belonging to this address family, that have been rejected due to RPF processing." ::= { jnxRpfStatsEntry 4 } END