JUNIPER-L2CP-FEATURES-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue FROM SNMPv2-TC InterfaceIndex, ifIndex FROM IF-MIB dot1dStpPort, dot1dStpPortEntry FROM BRIDGE-MIB jnxL2cpMibRoot FROM JUNIPER-SMI; jnxL2cpFeaturesMIB MODULE-IDENTITY LAST-UPDATED "201006110000Z" ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO "Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "This mib module is for Juniper Networks Proprietory Layer 2 control protocol (L2CP) features" REVISION "201006110000Z" -- June 11, 2010 DESCRIPTION "Added new trap jnxLacpTimeOut." ::= { jnxL2cpMibRoot 1 } jnxL2cpObjects OBJECT IDENTIFIER ::= { jnxL2cpFeaturesMIB 1 } jnxL2cpNotifications OBJECT IDENTIFIER ::= { jnxL2cpFeaturesMIB 2 } jnxL2cpStpProtectObjects OBJECT IDENTIFIER ::= { jnxL2cpObjects 1 } jnxL2cpBpduProtectObjects OBJECT IDENTIFIER ::= { jnxL2cpObjects 2 } jnxDot1dStpPortProtectTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxDot1dStpPortProtectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the jnxDot1dStp Port Table for providing enterprise specific extensions for Root Protect and Loop Protect to the corresponding dot1dStpPortTable entry." ::= { jnxL2cpStpProtectObjects 1 } jnxDot1dStpPortProtectEntry OBJECT-TYPE SYNTAX JnxDot1dStpPortProtectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the jnxDot1dStpPortProtectTable. This essentially augments the dot1dStpPortTable with additional objects." AUGMENTS { dot1dStpPortEntry } ::= { jnxDot1dStpPortProtectTable 1 } JnxDot1dStpPortProtectEntry ::= SEQUENCE { jnxDot1dStpPortRootProtectEnabled TruthValue, jnxDot1dStpPortRootProtectState INTEGER, jnxDot1dStpPortLoopProtectEnabled TruthValue, jnxDot1dStpPortLoopProtectState INTEGER } jnxDot1dStpPortRootProtectEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port, even it has the best spanning tree priority vector. This parameter should be FALSE by default. " ::= { jnxDot1dStpPortProtectEntry 1 } jnxDot1dStpPortRootProtectState OBJECT-TYPE SYNTAX INTEGER { no-error (0), root-prevented (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the port was prevented from being a root port. This parameter will always return 'no-error (0)' if jnxDot1dStpPortRootProtectEnabled is FALSE. " ::= { jnxDot1dStpPortProtectEntry 2 } jnxDot1dStpPortLoopProtectEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port when the received superior BPDU is aged out. This parameter should be FALSE by default. " ::= { jnxDot1dStpPortProtectEntry 3 } jnxDot1dStpPortLoopProtectState OBJECT-TYPE SYNTAX INTEGER { no-error (0), loop-prevented (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a potential Loop was prevented on the port This parameter will always return 'no-error (0)' if jnxDot1dStpPortLoopProtectEnabled is FALSE. " ::= { jnxDot1dStpPortProtectEntry 4 } jnxL2cpBpduProtectPortTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxL2cpBpduProtectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a Port Table for BPDU Protect information. This contains only those ports on which BPDU Protect can be configured." ::= { jnxL2cpBpduProtectObjects 1 } jnxL2cpBpduProtectPortEntry OBJECT-TYPE SYNTAX JnxL2cpBpduProtectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the jnxL2cpBpduProtectPortTable. A list containing BPDU Protect information for each Port." INDEX { ifIndex } ::= { jnxL2cpBpduProtectPortTable 1 } JnxL2cpBpduProtectPortEntry ::= SEQUENCE { jnxL2cpBpduProtectPortEnabled TruthValue, jnxL2cpPortBpduError INTEGER } jnxL2cpBpduProtectPortEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A Boolean value set by management indicating whether BPDU protect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a BPDU. This parameter should be FALSE by default. " ::= { jnxL2cpBpduProtectPortEntry 1 } jnxL2cpPortBpduError OBJECT-TYPE SYNTAX INTEGER { no-error (0), detected (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a BPDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpBpduProtectPortEnabled is FALSE. " ::= { jnxL2cpBpduProtectPortEntry 2 } jnxL2cpBpduProtectDisableTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the value of time (in seconds) after which a port on which BPDU error was detected will be re-enabled. A returned value of 0 indicates that port will not be re-enabled automatically." ::= { jnxL2cpBpduProtectObjects 2 } jnxL2cpProtectTraps OBJECT IDENTIFIER ::= { jnxL2cpNotifications 0 } jnxPortRootProtectStateChangeTrap NOTIFICATION-TYPE OBJECTS { jnxDot1dStpPortRootProtectState } STATUS current DESCRIPTION "Generated when the ports Root-protect state (no-error or root-prevented) changes." ::= { jnxL2cpProtectTraps 1 } jnxPortLoopProtectStateChangeTrap NOTIFICATION-TYPE OBJECTS { jnxDot1dStpPortLoopProtectState } STATUS current DESCRIPTION "Generated when the ports Loop-protect state (no-error or loop-prevented) changes." ::= { jnxL2cpProtectTraps 2 } jnxPortBpduErrorStatusChangeTrap NOTIFICATION-TYPE OBJECTS { jnxL2cpPortBpduError } STATUS current DESCRIPTION "Generated when the ports BPDU error state (no-error or detected) changes." ::= { jnxL2cpProtectTraps 3 } -- *************************************************************** -- Lacp Traps / Notifications Section -- *************************************************************** -- Lacp Notification Variables/Objects jnxLacpNotifyVars OBJECT IDENTIFIER ::= { jnxL2cpObjects 3 } jnxLacpNotificationsPrefix OBJECT IDENTIFIER ::= { jnxL2cpNotifications 1 } jnxLacpInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Lacp member interface." ::= { jnxLacpNotifyVars 1 } jnxLacpifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp ifIndex of member interface." ::= { jnxLacpNotifyVars 2 } jnxLacpAggregateInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Lacp Aggregate interface." ::= { jnxLacpNotifyVars 3 } jnxLacpAggregateifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp ifIndex of Aggregator." ::= { jnxLacpNotifyVars 4 } jnxLacpAggPortActorOperState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Port actor operational state." ::= { jnxLacpNotifyVars 5 } jnxLacpTimeOut NOTIFICATION-TYPE OBJECTS { jnxLacpInterfaceName, jnxLacpifIndex, jnxLacpAggregateInterfaceName, jnxLacpAggregateifIndex, jnxLacpAggPortActorOperState } STATUS current DESCRIPTION "Lacp times out" ::= { jnxLacpNotificationsPrefix 1 } END