-- -- Juniper Enterprise Specific MIB: Configuration Management MIB Extension -- -- Copyright (c) 2002-2003, 2006, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-CFGMGMT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC jnxMibs, jnxCmNotifications FROM JUNIPER-SMI; jnxCfgMgmt MODULE-IDENTITY LAST-UPDATED "200310240000Z" -- Wed Nov 19 00:00:00 2003 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "This MIB module defines objects used for managing the configuration of Juniper products." REVISION "200311190000Z" DESCRIPTION "Added Rescue Configuration Management." REVISION "200310240000Z" DESCRIPTION "Added JnxCmCfChgSource TEXTUAL-CONVENTION." REVISION "200205100000Z" DESCRIPTION "Initial revision." ::= { jnxMibs 18 } -- -- Textual Conventions -- JnxCmCfChgSource ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identifies the source of config event." SYNTAX INTEGER { other (1), cli (2), junoscript (3), synchronize (4), snmp (5), button (6), autoinstall (7), unknown (8) } JnxCmRescueCfgState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identifies the state of the rescue configuration." SYNTAX INTEGER { nonexistant (1), updated (2) } -- -- Configuration Change Management -- jnxCmCfgChg OBJECT IDENTIFIER ::= { jnxCfgMgmt 1 } jnxCmCfgChgLatestIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index in jnxCmCfgChgEventTable for the latest configuration change event." ::= { jnxCmCfgChg 1 } jnxCmCfgChgLatestTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the configuration was last changed. If the management subsystem was reset after the last configuration change, this object will return 0." ::= { jnxCmCfgChg 2 } jnxCmCfgChgLatestDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time when the configuration was last changed." ::= { jnxCmCfgChg 3 } jnxCmCfgChgLatestSource OBJECT-TYPE SYNTAX JnxCmCfChgSource MAX-ACCESS read-only STATUS current DESCRIPTION "The source of the configuration event." ::= { jnxCmCfgChg 4 } jnxCmCfgChgLatestUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the logged in user. The length is zero if not available or not applicable." ::= { jnxCmCfgChg 5 } jnxCmCfgChgMaxEventEntries OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries that can be held in jnxCmCfgChgEventTable." ::= { jnxCmCfgChg 6 } -- -- The folowing table provides a history of the most recent configuration -- change events. The number of events stored in the table is identified -- by jnxCmCfgChgMaxEventEntries. When the number of entries exceeds -- jnxCmCfgChgMaxEventEntries, each new entry will push the oldest entry -- out of the table. -- jnxCmCfgChgEventTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxCmCfgChgEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of configuration events on this router." ::= { jnxCmCfgChg 7 } jnxCmCfgChgEventEntry OBJECT-TYPE SYNTAX JnxCmCfgChgEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a configuration event on this router." INDEX { jnxCmCfgChgEventIndex } ::= { jnxCmCfgChgEventTable 1 } JnxCmCfgChgEventEntry ::= SEQUENCE { jnxCmCfgChgEventIndex Integer32, jnxCmCfgChgEventTime TimeTicks, jnxCmCfgChgEventDate DateAndTime, jnxCmCfgChgEventSource JnxCmCfChgSource, jnxCmCfgChgEventUser DisplayString, jnxCmCfgChgEventLog DisplayString } jnxCmCfgChgEventIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a specific configuration change event. Monotonically increasing values will be assigned by the snmp subsystem to each event as it occurs. If the snmp subsystem is reset, these index values will be reset as well." ::= { jnxCmCfgChgEventEntry 1 } jnxCmCfgChgEventTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the event occurred." ::= { jnxCmCfgChgEventEntry 2 } jnxCmCfgChgEventDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The system date and time when the event occurred." ::= { jnxCmCfgChgEventEntry 3 } jnxCmCfgChgEventSource OBJECT-TYPE SYNTAX JnxCmCfChgSource MAX-ACCESS read-only STATUS current DESCRIPTION "The source of the configuration event." ::= { jnxCmCfgChgEventEntry 4 } jnxCmCfgChgEventUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the logged in user. The length is zero if not available or not applicable." ::= { jnxCmCfgChgEventEntry 5 } jnxCmCfgChgEventLog OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The log of the configuration event. The length is zero if not available." ::= { jnxCmCfgChgEventEntry 6 } -- -- Configuration Rescue Change Management -- jnxCmRescueChg OBJECT IDENTIFIER ::= { jnxCfgMgmt 2 } jnxCmRescueChgTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the rescue configuration was last changed. If the management subsystem was reset after the last configuration change, this object will return 0." ::= { jnxCmRescueChg 1 } jnxCmRescueChgDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time when the rescue configuration was last changed." ::= { jnxCmRescueChg 2 } jnxCmRescueChgSource OBJECT-TYPE SYNTAX JnxCmCfChgSource MAX-ACCESS read-only STATUS current DESCRIPTION "The source of the rescue configuration event." ::= { jnxCmRescueChg 3 } jnxCmRescueChgUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the logged in user. The length is zero if not available or not applicable." ::= { jnxCmRescueChg 4 } jnxCmRescueChgState OBJECT-TYPE SYNTAX JnxCmRescueCfgState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the rescue configuration." ::= { jnxCmRescueChg 5 } -- -- Configuration Management Notifications -- jnxCmNotificationsPrefix OBJECT IDENTIFIER ::= { jnxCmNotifications 0 } jnxCmCfgChange NOTIFICATION-TYPE OBJECTS { jnxCmCfgChgEventTime, jnxCmCfgChgEventDate, jnxCmCfgChgEventSource, jnxCmCfgChgEventUser, jnxCmCfgChgEventLog } STATUS current DESCRIPTION "Notification of a configuration management event as recorded in jnxCmCfgChgEventTable." ::= { jnxCmNotificationsPrefix 1 } jnxCmRescueChange NOTIFICATION-TYPE OBJECTS { jnxCmRescueChgTime, jnxCmRescueChgDate, jnxCmRescueChgSource, jnxCmRescueChgUser, jnxCmRescueChgState } STATUS current DESCRIPTION "Notification of the latest rescue configuration change." ::= { jnxCmNotificationsPrefix 2 } END