Media Flow Manager Web-Based Interface : CMC Profiles : CMC Profiles > Edit Profile

CMC Profiles > Edit Profile
Use this page to edit a configured profile chosen from the Profile name drop-down list. See Figure 66, next, for graphic. See cmc profile for CLI details.
Important! When you edit a profile, you must re-apply it to the nodes and/or groups that you want to have that profile; the changes are not automatically pushed out.
Figure 66 CMC Profiles > Edit Profile Page Detail (Select Profile)
Edit comment for CMC profile <profile>
Enter a new comment or change the existing comment. See Figure 67, next, for graphic. Click Apply to complete the change, Cancel to return to the previous configuration, and Save at the top to make changes persistent.
Figure 67 CMC Profiles > Edit Profile Page Detail (Edit Comment)
Add Generic Command
Enter a Sequence #, you can look at the commands already configured for that profile below in the All commands for CMC profile <profile> list to determine a sequence, and a CLI Command string. See Figure 68, next, for graphic.
Click Add Command to complete the add operation. Click Save at the top to make changes persistent across reboots.
Figure 68 CMC Profiles > Edit Profile Page Detail (Add Generic Command)
All commands for CMC profile <profile>
View all of the commands comprising the selected profile. Select commands you would like to remove from the profile and click Remove. See Figure 69, next, for graphic.
Click Save at the top to make changes persistent across reboots.
Figure 69 CMC Profiles > Edit Profile Page Detail (All Commands)
System Configuration For a Selected Profile
Once you select a profile on the Edit Profile page, all of the navigation links at the left operate only on the selected profile so you can make system configuration changes to the profile. Once changes are made, you must re-apply it to any nodes or groups that have had that profile applied. The links at left for editing profiles are given below.
DNS and Hosts
See “System Config > DNS” on page 42 and “System Config > Hosts” on page 44.
Web
See “System Config > Web” on page 46.
Users
See “System Config > Users” on page 48.
AAA (authentication)
See “System Config > AAA (authentication)” on page 50.
RADIUS
See “System Config > RADIUS” on page 51.
TACACS+
See “System Config > TACACS+” on page 53.
SNMP
See “System Config > SNMP” on page 55.
Faults
See “System Config > Faults” on page 57.
Logging
See “System Config > Logging” on page 59.
NTP
See “System Config > NTP” on page 64.
Licensing
See “System Config > Licensing” on page 65.
Upgrade
See “System Config > Upgrade” on page 66.

Report an Error
Media Flow Manager Administrator's Guide and CLI Command Reference
Copyright © Juniper Networks, Inc.