Getting Started : Upgrading and Rebooting : Saving and Applying a Configuration

Saving and Applying a Configuration
You can save a binary file with all current configuration data that can be used to restore the system configuration. You can also reset custom configurations to their factory defaults, upload a saved configuration, and import a configuration from another Media Flow Controller.
Saving and Applying a Configuration with the Web-Based Management Console
You can use the Web-based Management Console, System Config > Config Mgmt page to save a current configuration to a binary file and download it off-box. Later you can use the same page to upload the file and make it active.
Saving and Applying a Configuration with the CLI
Follow these steps to save and apply a configuration using the CLI.
1.
From Enable or Configure mode, save a configuration to a file; use no-switch to leave the current configuration active. Use show configuration files to see the saved file name.
configuration write to <file_name> no-switch
2.
configuration upload <file_name> <URL>
3.
configuration fetch <URL>/<file_name>
4.
show configuration files
5.
configuration switch-to <file_name>
Example:
test-vos (config) # configuration write to 04_01_09 no-switch
test-vos (config) # show configuration files
04_01_09
initial (active)
initial.bak
test-vos (config) # configuration upload 04_01_09 scp://joe@sv05/home/joe
Password: *******
test-vos (config) # configuration delete 04_01_09
test-vos (config) # show configuration files
initial (active)
initial.bak
test-vos (config) # configuration fetch scp://joe@sv05/home/joe/04_01_09
Password: *******
test-vos (config) # show configuration files
04_01_09
initial (active)
initial.bak
test-vos (config) # configuration switch-to 04_01_09
test-vos (config) # show configuration files
04_01_09 (active)
initial
initial.bak
test-vos (config) #
6.
configuration merge <file_name>
7.
Revert the active configuration to either the factory defaults or the last saved configuration. Use keep-basic to preserve licenses and SSH host keys, use keep-connect to preserve anything necessary to maintain network connectivity to the system: interfaces, routes, and ARP; either or both may be used.
configuration revert {factory | saved} [keep-basic] [keep-connect]

Report an Error
Media Flow Controller and Media Flow Manager Installation Guide
Copyright © Juniper Networks, Inc.