Getting Started : Pre-Installation Planning : Connecting and Logging In

Connecting and Logging In
You can connect to the CLI with SSH, Telnet (once enabled, Telnet is disabled by default), or serial console using the IP address of your Media Flow Controller or Media Flow Manager. The appliance responds with a login prompt. Enter admin as the user; there is no default password. Once you have connected, you must enter enable (for Enable mode) and then configure terminal (for Configure mode) in order to begin configuring Media Flow ControllerMedia Flow Manager.
Likewise, you can log in to the Web-based Management Console by entering the IP address and port 8080 in a browser window and using admin as the login name.

Report an Error
Media Flow Controller and Media Flow Manager Installation Guide
Copyright © 2010 Juniper Networks, Inc.