Installing Media Flow Controller with CD-ROM or USB

Installing Media Flow Controller with CD-ROM or USB
This chapter describes Creating USB Images, Installing Media Flow Controller Software—CD-ROM/USB, and configuring the necessary network connections. To obtain the Media Flow Controller CD-ROM or USB install package, see “Requesting Technical Support” on page 1-12. Before beginning, be sure to review “ Pre-Installation Planning” 15 for important information.
Important! This chapter is for installing Media Flow Controller on hardware other than Juniper Networks VXA series hardware.
You can request a CD-ROM or a USB drive with the software, or download the ISO image and burn your own CD-ROM and/or create a USB drive, and install using it.
Tip! If you received a Media Flow Controller USB drive or CD-ROM, skip the next section and go directly to Installing Media Flow Controller Software—CD-ROM/USB.

Report an Error
Media Flow Controller and Media Flow Manager Installation Guide
Copyright © Juniper Networks, Inc.