Media Flow Controller Web-Based Interface : System Config Tab : System Config > Config Mgmt

System Config > Config Mgmt
Manage configuration files.
Configuration Files
Select a file and use the buttons to Delete it, Switch-To that configuration, or Download the selected configuration as a binary file. See Figure 57. For each Configuration File:
Filename—Name of the configuration.
Active—Whether or not the configuration is currently in use.
Select a configuration and Delete, Switch, and/or Download it. Click Save at the top of the page to make changes persistent across reboots.
Figure 57 System Config > Configurations Page Detail (Configuration Files)
Active Configuration
For the current, active configuration: Save it to the active configuration file, Revert the running configuration to the saved active configuration, Reset both the running and the active configuration files to the factory defaults, or Save As a new file. See Figure 58.
Figure 58 System Config > Configurations Page Detail (Active Configuration)
Upload Configuration File
Upload as local binary file or a local text file. See Figure 59.
Figure 59 System Config > Configurations Page Detail (Upload Configuration)
Execute CLI Commands
Use this text box to enter CLI commands to be executed ad-hoc.
Import Configuration
Retrieve a configuration from a remote system. See Figure 60.
Hostname or IP address—The location of the desired configuration.
Remote Username—Login username.
Remote Password—Login password for the set Remote Username.
Remote Config Name—File name of the desired configuration.
New Config Name—A new name for the imported configuration (optional).
Import shared data only—Uncheck to import all nodes, even those not available on this system.
Figure 60 System Config > Configurations Page Detail (Import Configuration)

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.