Media Flow Controller Web-Based Interface : System Config Tab : System Config > CMC

System Config > CMC
Set server address, name, and rendezvous options to enable this Media Flow Controller to be managed by a Central Management Console (CMC).
Enable Configuration Changes
If this Media Flow Controller is already managed by a CMC server, this area displays to allow you to temporarily override the CMC management and Enable configurations. See Figure 32.
Figure 32 System Config > CMC Page Detail (Enable Configuration Changes)
CMC Client Setup
Set client parameters. See Figure 33.
Enable CMC Client—Allows this Media Flow Controller to be managed by a CMC server.
Automatic Rendezvous—Allows this Media Flow Controller to initiate connections to the configured CMC server.
Confirm config changes—Makes an administrator’s confirmation required for any changes initiated by the CMC server.
CMC Server Address—The IP address of the CMC server so the CMC client for this Media Flow Controller can initiate connections.
CMC Service Name—Only cmc is available for Release 2.0.2.
Click Apply to immediately apply changes; Cancel to reset the option to previous value (if any). Remember to click Save at the top of the page to make changes persistent.
Figure 33 System Config > CMC Page Detail (CMC Client Setup)
CMC Status
View monitoring parameters, and take the following actions, if needed
Refresh Status—Causes the Media Flow Controller to immediately send a status message to the CMC managing it.
Rendezvous Now—Causes the Media Flow Controller to immediately seek a connection to the CMC managing it.
Figure 34 System Config > CMC Page Detail (CMC Status)

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.