Media Flow Controller Web-Based Interface : System Config Tab : System Config > ARP (Address Resolution)

System Config > ARP (Address Resolution)
Manage Address Resolution Protocol (ARP) entries.
Static and Dynamic ARP Entries
View Static and Dynamic ARP Entries.
IP address—The configured IP address for this entry.
MAC address—The physical address of this entry.
Interface—The port configured for this entry.
Active—Whether or not this entry is being used currently.
Static—Whether or not this entry comes from DNS.
Click Remove Selected to delete an entry. Click Save at the top of the page to make changes persistent. See Figure 27.
Figure 27 System Config > ARP Page Detail (Static and Dynamic ARP Entries)
Add Static Entry
You need the IP address and MAC address of the system you want to add to the ARP cache as a static entry.
Click Add Entry to immediately apply changes; Cancel to revert to existing configuration. Click Save at the top of the page to make changes persistent. See Figure 28.
Figure 28 System Config > ARP Page Detail (Add Static Entry)
Clear Dynamic ARP Cache
Click Clear to empty the ARP cache. See Figure 29.
Figure 29 System Config > ARP Page Detail (Clear Dynamic ARP Cache)

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.