View, add, modify, or remove Static and Dynamic Name Servers and Domain Names from your Domain Name System (DNS).
• IP Address—Of the configured name server.
• Active—Whether or not this name server is being used currently.
• Source—”Configured” means it was manually added; “Dynamic” means it came from a name server.
• Primary DNS IP address—This name server is tried first.
• Secondary DNS IP address—This name server is tried second.
• Tertiary DNS IP address—This name server is tried last.
• Click Apply to immediately apply changes; Cancel to revert to existing configuration. Click Save at the top of the page to make changes persistent.
• Domain—The configured name for that domain.
• Active—Whether or not this domain name is being used currently.
• Source—”Configured” means it was manually added; “Dynamic” means it came from a name server.All configured domain names. You can select a name and click Remove Selected. Click Save at the top of the page to make changes persistent. See Figure 22.Enter a name and click Add Domain Name to add a new configured domain name; can be removed from the list of Configured Domain Names described above. Click Save at the top of the page to make changes persistent. See Figure 23.
Report an Error |
Media Flow Controller Administrator's Guide and CLI Command Reference |
Copyright © 2010 Juniper Networks, Inc. |