Media Flow Controller Fault Management : Troubleshooting Media Flow Controller : Replacing Bad Disks

Replacing Bad Disks
In order to replace a bad disk, first disable and inactivate the disk, and then add a new disk.
1.
show media disk list
2.
media-cache disk dc_bad cache disable
3.
media-cache disk dc_bad status inactive
4.
media-cache disk mount-new
5.
show media-cache disk list
6.
media-cache disk dc_new status active
7.
media-cache disk dc_new format
8.
media-cache disk dc_new cache enable
For more details, see “Managing the Media Cache” on page 91.

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.