Media Flow Controller Configuration Tasks : Advanced Configurations : Upgrading

Upgrading
When upgrades are available, Juniper Networks will broadcast the upgrade URL to use in this procedure. Note that upgrade preserves the current, saved, configurations; however, you may still want to save the current configuration to a file off-box by following the previous procedure.
Note! If disk partitions are changing then a re-manufacture is required; follow “Saving and Applying Configurations” on page 106 steps along with the appropriate installation instructions described in the Media Flow Controller and Media Flow Manager Installation Guide.
1.
image fetch <URL>/<filename>
2.
image install <filename>
3.
show images
4.
image boot next
5.
reload
6.
show version
To upgrade using the Management Console, go to the System Config tab, Upgrade page; see System Config > Upgrade for details.

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.