Media Flow Controller Configuration Tasks : First Time Login : Enable Mode, Configure Mode

Enable Mode, Configure Mode
Enter and leave enable, standard, and configure CLI modes.
1.
enable
2.
disable
3.
Enter configuration mode from enable mode (must be in enable mode first), if the current user account has the privileges to do so. Note there is no mechanism to prevent multiple users from being in configuration mode simultaneously.
configure terminal
4.
exit
no configure
CTRL+d
5.
Exit the current mode. From configuration mode, go to enable mode. From enable or standard mode, log out of the system and close the window. Note to go from enable mode to standard mode, use disable as described above in Step 2.
exit

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.