Media Flow Controller Configuration Tasks : First Time Login

First Time Login
To log into the system command line interface (CLI) for the first time, you need the IP address assigned the management interface.
1.
Open an SSH session and enter the Media Flow Controller management IP address or hostname, or open a serial console session with the console server IP address and port, to connect.
2.
To log into the Management Console (Web UI), just navigate to the configured Media Flow Controller IP address, specify the management port (:8080), and use the same login credentials. The Management Console has a subset of the CLI commands, but is good for simple or First Day configurations. Example:
http://192.168.1.100:8080.

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.