tech-support

EXEC command. Use this command to collect system information.

tech-support {<URL> | <SCP>}

Upload the tech-support file to the specified URL. Only FTP and TFTP URLs, as well as SCP pseudo-URLs are supported for the destination. See the “Command Arguments Key” on page 161 for the scp URL format and requirements.

The file is created with the name “nkn_tech-support”. Juniper Networks highly recommends that, if you have multiple Media Flow Controllers, each Media Flow Controller be configured with a different path variable (use a different directory) so that tech-support data from one Media Flow Controller doesn’t overwrite data from another; if different hosts are used for each Media Flow Controller, then the same path name can be used.