Media Flow Controller CLI Commands : ssh : ssh client

ssh client
Configure SSH (secure sockets shell) client options.
ssh client
host-key-check {ask | no | yes}
known-host <known_host_entry>
user {<username> | admin | cmcrendv | monitor}
authorized-key sshv2 <public_key>
identity {<key_type> | rsa2 | dsa2}
private-key [<key>]
public-key <key>
known-host <IP_address> [remove]
global—Configure global SSH client settings.
host-key-check—Set SSH client configuration to control how host key checking is done. Use no to disable host key checking. Arguments:
ask—Prompt the user to accept new host keys, but disallow connection if there is already a known host entry that does not match the one presented by the host.
no—Accept unknown keys and add them to the relevant known hosts file.
yes—Only permit connections if a matching host key is in the known hosts file.
known-host <known_host_entry>—Add or delete (with no) an entry to the global known-hosts configuration file.
user <username>—Configure an SSH user.
authorized-key sshv2 <public_key>—The specified key is added to the list of authorized SSHv2 RSA or DSA public keys for this user account. These keys can be used to log into the user's account. The specified user must be a valid account on the system. As keys are added, an implicit ID is associated with the key; this is to make key deletion easier. Note if a key is pasted from a cut buffer and displayed with a paging program, it is likely that newline characters have been inserted, even if the output was not long enough to require paging; most show command output is displayed this way, as paging is enabled by default in the CLI. Specify no cli session paging enable before doing the show command to prevent the newlines from being inserted. Use no ssh client user <username> authorized-key sshv2 <key_id> to delete a public key from the specified user's authorized key list. The key identifier can be found with show ssh client.
identity <key_type>—Set SSH client identity options for the specified user.
generate—Generate a new identity (private and public keys) for the specified user name. The given user name must correspond to a valid local user account. When the keys are generated, the private key is written to the user's .ssh directory in an appropriately named file (for example, id_dsa). This identity can be used when the user connects from the system to another host with slogin. DSA and RSA v2 keys for SSHv2 can be generated using dsa2 or rsa2 as the key-type.
private-key—Set private key SSH client identity for the specified user. An optional passphrase may be specified for the private key.
public-key—Set public key SSH client identity for the specified user.
Set the public or private key of specified type for the specified user name. This is an alternative to generating the key in the above command and is also used for reverse mapping generated keys. If the private-key command is used with no key given, the user is prompted for the key. Entries made at this prompt echo the asterisk (*) character, and the user must enter the same string twice. Use no ssh client user <username> identity <key_type> to delete the public/private keys for the specified user; any private key file in a valid user .ssh directory is deleted.
known-host <IP_address> remove—Delete a known host from the specified user's .ssh known_hosts file.
show ssh client
SSH client identities (public/private keys) and the per user list of authorized keys for the users.

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.