Media Flow Controller CLI Commands : fuselog

Configure FMSConnector Log / fuselog options; while the streamlog records RTMP transactions, the fuselog records RTMP transaction details including what URIs are accessed and how many bytes are returned by the FUSE module. This log is generated by Media Flow Controller.
See “Service Log Options” on page 93 for task details including information on log rotation. See “FMSConnector Log / fuselog” on page 125 for usage information.
copy <SCP>
filename <name>
on-the-hour {disable | enable}
rotate {filesize-MB <integer> | time-interval <hour(s)>}
syslog replicate {disable | enable}
copy—Auto upload (when the set rotate criteria is reached) the fuse log using SCP (secure channel protocol), to the server specified using hostname. If username and password are provided, Media Flow Controller uses that for authentication of the SCP session. The no variant disallows auto upload. See the “Command Arguments Key” on page 161 for the scp URL format); you must have an SCP server installed in order to SCP files to your machine.
filename—Configure the name of the file where the fuse log is stored. Default is fuselog.<num>.yyyymmdd_hour:min:sec (numbered sequentially).
on-the-hour—Set hourly log rotation. Default is no (disabled).
rotate—Media Flow Controller allows fuse log rotation based on file size or time.
filesize-MB—Set rotation based on file size. Media Flow Controller creates "fuse.log.1," "fuse.log.2" and so on up to "fuse.log.10," after which it wraps around. By default, each file size is 100MB. Juniper Networks highly recommends not increasing the size; huge file transfers take a lot of time, and if there is a system reset, large volumes of data are at risk.
time-interval—Set rotation based on time. Specify a time in hours after which the fuse log is rotated.
syslog replicate—Specify whether (enable) or not fuse log messages are seen as part of SYSLOG; default is no (disabled); fuse log is not seen as part of SYSLOG.

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.