Media Flow Controller CLI Commands : fmsedgelog

fmsedgelog
Configure FMS (Flash Media Server) edge log options; this log is generated by the FMS server. In the Web-based interface, this log displays as FMSEdge Log under the Logs tab. The fmsedgelog displays transactions to the FMS edge server; for example, “Connection rejected by server,” “Edge disconnected from core,” “Listener started for clients.” This log is written to /nkn/adobe/fms/logs/edge.<nn>.log, by default (you can access this using application fms shell). This log is used for diagnostic purposes.
See “Service Log Options” on page 93 for task details including information on log rotation. See “FMSEdge Log (fmsedgelog)” on page 124 for usage information.
fmsedgelog
copy <SCP>
filename <name>
on-the-hour {disable | enable}
rotate {filesize-MB <integer> | time-interval <hour(s)>}
syslog replicate {disable | enable}
Notes:
copy—Auto upload (when the set rotate criteria is reached) the FMS edge log using SCP (secure channel protocol), to the server specified using hostname. If username and password are provided, Media Flow Controller uses that for authentication of the SCP session. The no variant disallows auto upload. See the “Command Arguments Key” on page 161 for the scp URL format); you must have an SCP server installed in order to SCP files to your machine.
filename—Configure the name of the file where the FMS edge log is stored. Default is fmsedgelog.<num>.yyyymmdd_hour:min:sec (numbered sequentially).
on-the-hour—Set hourly log rotation. Default is no (disabled).
rotate—Media Flow Controller allows FMS edge log rotation based on file size or time.
filesize-MB—Set rotation based on file size. Media Flow Controller creates "fmsedge.log.1," "fmsedge.log.2" and so on up to "fmsedge.log.10," after which it wraps around. By default, each file size is 100MB. Juniper Networks highly recommends not increasing the size; huge file transfers take a lot of time, and if there is a system reset, large volumes of data are at risk.
time-interval—Set rotation based on time. Specify a time in hours after which the FMS edge log is rotated.
syslog replicate—Specify whether (enable) or not FMS edge log messages are seen as part of SYSLOG; default is no (disabled); FMS edge log is not seen in SYSLOG.

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.