Media Flow Controller CLI Commands

Media Flow Controller CLI Commands
This is a list of all commands, with brief descriptions. Click a name to jump to that topic.
Note! Certain commands only appear if you are in one of the three command modes. See “CLI Options” on page 162 for details. Commands that do not require being in a mode are EXEC commands.
aaa (authentication, authorization, accounting). Set authentication and authorization.
accesslog Configure access log.
analytics Configure cache analytics options.
application Configure Flash Media Server integration.
arp (address resolution protocol). Set ARP servers.
banner Manage Web banners.
bond Configure bonded interfaces.
boot Configure system booting.
cachelog Configure cache log.
clear EXEC. Clear the arp cache.
cli Information on command modes, and CLI options; see “CLI Options” on page 162.
clock Set the system date and time.
cmc Configure authorization (auth), client, and rendezvous options for Central Management Console management of a Media Flow Controller.
configuration Manipulate configuration files.
configure Go to Configuration mode for additional commands; disallowed for unpriv users.
debug Generate a "dump" of the system debugging utility.
delivery Set delivery protocol options, including enabling delivery trace.
email Configure email and event notification via email.
enable Go to Enable mode for additional commands; disallowed for unpriv users.
errorlog Configure error log.
exit Leave Configuration mode, or close the CLI window if in Standard mode.
file Manipulate stats, and tcpdump reports.
fmsaccesslog Displays all FMS server command executions.
fmsedgelog Displays transactions to the FMS edge server.
fuselog Records RTMP transaction details.
help View the interactive help system.
hostname Set the system’s hostname.
image Manage software images.
interface Configure network interfaces.
ip Configure IP addresses.
license Activate features using license keys.
logging Configure event logging.
management Configure management interface (eth0).
media-cache EXEC. Configure disk-cache and file-cache settings.
namespace Configure namespaces. Includes EXEC command namespace object list.
network Make network layer configurations.
no Negate or clear certain configuration options.
ntp and ntpdate Configure NTP (Network Time Protocol) servers and system clock.
ping EXEC. Send ICMP echo requests to a specified host.
radius-server Configure RADIUS server settings.
ram-cache RAM cache options.
reload Reboot or shut down the system.
reset Reset the system to its factory state.
server-map Specify a file and protocol for resolving incoming cache-miss requests.
service Restart certain services after an IP address or delivery protocol port change.
show Display system configuration or statistics; applies to most commands, e.g. show files lists available files or displays their content, if the file is specified. Includes special subcommands. Many are EXEC commands.
slogin EXEC. Log into another system securely using SSH.
snmp-server Configure SNMP (simple network management protocol) server options.
ssh Configure SSH (secure shell) settings.
stats Configure statistics and alarms.
streamlog Configure streaming log.
tacacs-server Configure TACACS+ server settings.
tcpdump Display packets on a network.
tech-support EXEC. Collect system information.
telnet EXEC. Log into another system using telnet.
telnet-server Enable/disable the TELNET server.
terminal EXEC. Set terminal options. See “CLI Options” on page 162.
tracelog Configure trace log.
traceroute EXEC. Trace the route packets take to a destination.
upload Upload the accesslog, errorlog, or a namespace object.
username Configure user accounts and set capabilities.
virtual-player Configure Media Flow Controller’s player management functions.
web Configure the Web-based management console.
write Save the running configuration to persistent storage.

Report an Error
Media Flow Controller Administrator's Guide and CLI Command Reference
Copyright © 2010 Juniper Networks, Inc.