Monitoring MPLS RSVP Interfaces Information

To view the interfaces on which RSVP is running, select Monitor > MPLS > RSVP Interfaces, or enter the following CLI command:

show rsvp interface

After you make changes to the configuration in this window, you must commit the changes immediately for them to take effect. To commit all changes to the active configuration, select Commit Options > Commit. See Using the Commit Options to Commit Configuration Changes (J-Web Procedure) for details about all commit options.

Table 64 summarizes key output fields in the RSVP interfaces information display.

Table 64: Summary of Key RSVP Interfaces Information Output Fields

Field	Values	Additional Information
RSVP Interface	Number of interfaces on which RSVP is active. Each interface has one line of output.
Interface	Name of the interface.
State	State of the interface: Disabled—No traffic engineering information is displayed. Down—The interface is not operational. Enabled—Displays traffic engineering information. Up—The interface is operational.
Active resv	Number of reservations that are actively reserving bandwidth on the interface.
Subscription	User-configured subscription factor.
Static BW	Total interface bandwidth, in bits per second (bps).
Available BW	Amount of bandwidth that RSVP is allowed to reserve, in bits per second (bps). It is equal to (static bandwidth X subscription factor).
Reserved BW	Currently reserved bandwidth, in bits per second (bps).
Highwater mark	Highest bandwidth that has ever been reserved on this interface, in bits per second (bps).