Adding, Editing, and Deleting Certificates on the Device

You can use the Certificates tab to upload SSL certificates to the device, edit existing certificates on the device, or delete certificates from the device. You can use the certificates to secure HTTPS and JUNOScript sessions.

To add, edit, or delete a certificate:

  1. In the J-Web user interface, select Configure > System Properties > Management Access.

    Note: After you make changes to the configuration in this window, you must commit the changes immediately for them to take effect. To commit all changes to the active configuration, select Commit Options > Commit. See Using the Commit Options to Commit Configuration Changes (J-Web Procedure) for details about all commit options.

  2. Click Edit. The Edit Management Access dialog box appears.
  3. Select the Certificates tab.
  4. Choose one of the following options:
    • To add a new certificate, click Add. The Add Certificate section is expanded.
    • To edit the information for an existing certificate, select it and click Edit. The Edit Certificate section is expanded.
    • To delete an existing certificate, select it and click Delete. (You can skip the remaining steps in this section.)
  5. In the Certificate Name box, type a name; for example, new.
  6. In the Certificate content box, paste the generated certificate and RSA private key.
  7. Click Save.
  8. Click OK to save the configuration or Cancel to clear it.