Enabling Access Services

You can use the Services tab to specify the type of connections that users can make to the device. For instance, you can enable secure HTTPS sessions to the device or enable access to the JUNOScript XML scripting API.

To enable access services:

  1. In the J-Web user interface, select Configure > System Properties > Management Access.

    Note: After you make changes to the configuration in this window, you must commit the changes immediately for them to take effect. To commit all changes to the active configuration, select Commit Options > Commit. See Using the Commit Options to Commit Configuration Changes (J-Web Procedure) for details about all commit options.

  2. Click Edit. The Edit Management Access dialog box appears.
  3. Select the Services tab.
  4. To enable users to create secure Telnet or secure SSH connections to the device, select Enable Telnet or Enable SSH.
  5. To enable access to the JUNOScript XML scripting API, select Enable JUNOScript over clear text or Enable JUNOScript over SSL. If you enable JUNOScript over SSL, select the certificate you want to use for encryption from the JUNOScript certificate drop-down list.
  6. Select Enable HTTP if you want users to connect to device interfaces over an HTTP connection. Then specify the interfaces that should use the HTTP connection:
    • Enable on all interfaces—Select this option to enable HTTP on all device interfaces.
    • Selected interfaces—Use the arrow buttons to populate this list with individual interfaces to enable HTTP on only some of the device interfaces.
  7. For users to connect to device interfaces over a secure HTTPS connection, select Enable HTTPS. Then select which certificate to use to secure the connection from the HTTPS certificates list and specify the interfaces that should use the HTTPS connection:
    • Enable on all interfaces—Select this option to enable HTTPS on all device interfaces.
    • Selected interfaces—Use the arrow buttons to populate this list with individual interfaces to enable HTTPS on only some of the device interfaces.
  8. Click OK to save the configuration or Cancel to clear it.

To verify that Web access is enabled correctly, connect to the device using one of the following methods: