To view currently active RSVP session information, select Monitor > MPLS > RSVP Sessions, or enter the following CLI command:
show rsvp session
 |
Note: After you make changes to the configuration in this window, you must commit the changes immediately for them to take effect. To commit all changes to the active configuration, select Commit Options > Commit. See Using the Commit Options to Commit Configuration Changes (J-Web Procedure) for details about all commit options. |
Table 63 summarizes key output fields in the RSVP session information display.
Table 63: Summary of Key RSVP Session Information Output Fields
|
Field |
Values |
Additional Information |
|---|---|---|
|
Ingress LSP |
Information about inbound RSVP sessions. Each session has one line of output. |
|
|
Egress LSP |
Information about outbound RSVP sessions. Each session has one line of output. |
MPLS learns this information by querying RSVP, which holds all the transit and outbound session information. |
|
Transit LSP |
Information about transit RSVP sessions. |
MPLS learns this information by querying RSVP, which holds all the transit and outbound session information. |
|
To |
Destination (outbound device) of the session. |
|
|
From |
Source (inbound device) of the session. |
|
|
State |
State of the path: Up, Down, or AdminDn. |
AdminDn indicates that the LSP is being taken down gracefully. |
|
Rt |
Number of active routes (prefixes) installed in the routing table. |
For inbound RSVP sessions, the routing table is the primary IPv4 table (inet.0). For transit and outbound RSVP sessions, the routing table is the primary MPLS table (mpls.0). |
|
Style |
RSVP reservation style. This field consists of two parts. The first is the number of active reservations. The second is the reservation style, which can be FF (fixed filter), SE (shared explicit), or WF (wildcard filter). |
This field is used for outbound and transit LSPs only. |
|
Labelin |
Incoming label for this RSVP session. |
|
|
Labelout |
Outgoing label for this RSVP session. |
|
|
LSPname |
Configured name of the LSP. |
|
|
Total |
Total number of RSVP sessions displayed for the particular type; ingress (inbound), egress (outbound), or transit). |
 |
Copyright © 2010, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |