[Report an Error]

Monitoring Chassis Information

To view chassis properties in the J-Web interface, select Monitor > System View > Chassis Information (see Figure 37).

Note: After you make changes to the configuration in this window, you must commit the changes immediately for them to take effect. To commit all changes to the active configuration, select Commit Options > Commit. See Using the Commit Options to Commit Configuration Changes (J-Web Procedure) for details about all commit options.

To view chassis properties in the CLI, enter the following commands:

Figure 37: Chassis Information Page

Chassis Information Page

Table 40 gives information about the key output fields for chassis information.

Table 40: Summary of the key output fields for chassis information

Field

Values

Routing Engine Details

Select the Master tab to view details about the master Routing Engine, or select Backup to view details about the backup Routing Engine.

Name/Value

This table displays the following details for the master Routing Engine:

  • Slot
  • Model
  • Version
  • Part number
  • Serial number
  • Memory utilization
  • Temperature
  • Start time
  • CPU load average for 1, 5, and 15 minutes

Power and Fan Tray Details

Power

Select the Power tab to view details of the power supplies.

Name/Value

Displays the status and model number of each power supply.

Fan

Select the Fan tab to view details about the fans.

Name/Value

Displays the status of each fan in the corresponding FPC.

Chassis Component Details

Select component

Select an FPC to view General, Temperature, Resource and Sub-component details.

General

Select the General tab to view the general information about the chassis components.

Name/Value

Displays general information:

  • Version—Revision level. Supply the version number when reporting hardware problems to customer support.
  • Part Number
  • Serial Number—Supply the serial number when contacting customer support about the switch chassis.
  • Description—Brief text description.

Temperature

Select the Temperature tab to view the temperature details of the components in the selected FPC.

Name/Value

Displays the temperature details of the sensors present in the selected FPC,

Resource

Select the Resource tab to view the resource details of the selected FPC.

Name/Value

Displays resource details:

  • State:
    • Dead—Held in reset because of errors.
    • Diag—The FPC is running diagnostics.
    • Dormant—Held in reset.
    • Empty—No FPC is present.
    • Online—The FPC is online and running.
    • Probed—Probe is complete. The FPC is awaiting restart of the Packet Forwarding Engine (PFE).
    • Probe-wait—The FPC is waiting for the probe operation to start.
  • Total CPU DRAM—Total DRAM, in megabytes, available to the FPC.
  • Start time—Date and time the switch was last rebooted.

Sub-component

Select the Sub-component tab to view the general information about the chassis components.

Name/Value

Displays general information:

  • Name
  • Version—Revision level. Supply the version number when reporting hardware problems to customer support.
  • Part Number
  • Serial Number—Supply the serial number when contacting customer support about the switch chassis.
  • Description—Brief text description.
[Report an Error]

Copyright © 2010, Juniper Networks, Inc. All rights reserved. Trademark Notice.