Pseudowires — Filter and Test l2circuit Pseudowires (Test Results) Dialog Box

Description

This dialog box displays the status of the pseudowire and a message from Junos Scope.

Click Provisioning > Pseudowires > Filter and Test l2circuit Pseudowires and click OK after specifying the criteria, and then click Test after selecting one or more pseudowires.

Permissions

Superuser, read-write, read-only

Elements

Previous button—Click this to go back to the list of pseudowires (results) dialog box.

The table at the bottom of this dialog box displays the following information:

• Source Device
• Destination Device
• Virtual Circuit ID
• Status
• Message