Monitoring—RMON Probe Configuration—Select Prob Params Dialog Box

Description

Use the Select Prob Params dialog box to configure a RMON probe for a device in Junos Scope. The RMON probe monitors traffic on the pseudowire and sets an alarm when a certain condition occurs.

Click Provisioning > Monitoring > Monitor Pseudowire Parameters. Click Filter in the Filter Pseudowires dialog box after entering the details.

Permissions

Superuser, read-write, read-only

Elements

Select Parameter: drop down list—Select a parameter from the Select Parameter list. The available options include Missing Packets, Jitter Buffer Underruns, Malformed Packets, Error seconds, and so on.

Min Value: field—Enter the minimum value that the selected parameter can have. If the parameter has a value lower than this, an alarm is triggered.

Max Value: field—Enter the maximum value that the selected parameter can have. If the parameter has a value higher than this, an alarm is triggered.

Select Pseudowires:

Configure Prob button—Click to configure a RMON probe for the pseudowire. The Confirm Configuration dialog box appears.

Previous button—Click to go back to the previous step.

Cancel button—Cancels the operation and displays the Pseudowire Monitoring menu.