Monitoring—Trap Destination Configuration—Configure Trap Destination Dialog Box

Use the Trap Destination Configuration dialog box to configure a device in Junos Scope with a trap destination

Click Provisioning > Monitoring >Trap Destination Configuration.

Superuser, read-write, read-only

Selection of Trap destination devices and schedule:

Trap Destination field— Enter the IP address of the trap destination. Ensure that you entered a valid IP address in the trap destination field.

Select Devices:

Select Device Groups check box and drop-down list box—Select a device group to which you want to configure a trap destination. Click the Group option button, then click the Group drop-down list box to display the available groups for Junos Scope software operations. If you have not added any device groups, the Groups drop-down list box is empty.
Select Device(s) check box and drop-down list box—Select a device or devices to which you want to configure a trap destination. Click the Devices option button, then click the Devices drop-down list box to display the available devices added for Junos Scope software operations. If you have not added any devices, the Select Device(s) drop-down list box is empty.
Comment field—Enter a descriptive comment about the trap destination you want to configure.

Select Time or Save Operation section:

Now check box—Select to push the configuration to the device as soon as the command is executed.
Save Operation as text box—Type a name for the operation that you want to save. The saved execution operation appears in the Saved Operations dialog box with the name that you gave it. To view the Saved Operations dialog box, click Settings > Saved Operations.
Select Schedule area—Select a schedule for when you to push the configuration to the device.

OK button—Click OK to go to open the Confirm Configuration dialog box.

Cancel button—Click Cancel to go back to the Pseudowire Monitoring dialog box.