Monitoring—Monitor Pseudowire Parameters—Filter Pseudowires Dialog Box

Use the Filter Pseudowires dialog box to filter pseudowires based on one of the many criteria provided and monitor them.

Click Provisioning > Monitoring > Monitor Pseudowire Parameters..

Superuser, read-write, read-only

The following criteria are available for filtering pseudowires and displaying results:

Select Device Groups—Displays pseudowires configured on the selected device groups. Press the Shift key to select multiple device groups.
Select Devices—Displays pseudowires configured on the selected devices. Press the Shift key to select multiple devices.
Select Pseudowire Endpoints—Select pseudowire endpoints from the drop-down list boxes. Displays the pseudowires configured between the selected endpoints.
Virtual Circuit ID—Displays the pseudowires with the Virtual Circuit ID you enter.
VPN Name—Displays the pseudowires with the VPN name you enter.
Site Name—Displays the pseudowires with the Site Name you enter.
Site ID—Displays the pseudowires with the Site ID you enter.

OK button—Click OK after specifying the filtering criterion to display results.