Diagnostics — Ping — Select Devices Dialog Box

Description

Use the Select Devices dialog box to select devices and perform a Ping test on them.

Click Provisioning > Diagnostics > Ping

Permissions

Superuser, read-write, read-only

Elements

Source Device

• Select Device option button and drop-down list box—Select the source device on which the Ping test is going to be performed. If you have not added any routers, the drop-down list box is empty.

Destination Device(s)

• Select Device(s) drop down list—Select the destination device on which the Ping test is going to be performed.
• Enter Hostname/IP Address field— Enter the IP address of the destination device in the Enter Hostname/IP Address field.

Add button— Adds the device combination to the Selected Device Combination list.

Selected Device Combinations list box— Displays the device combinations on which the Ping test is going to be performed. Ping is used to verify that the host can be reached over the network.

Remove button—Clears the selected combinations from the Selected Device Combination list box.

Remove All button—Clears the Selected Device Combinations list box.

OK button—Click OKClick OK to open the Ping Results dialog box.