Diagnostics — LSP Ping — L2VPN — Select L2VPN Pseudowires Dialog Box


This dialog box lists the pseudowires according to the criteria you specified.

Click Diagnostics > LSP Ping > L2VPN and then click Filter after specifying the criteria.


Superuser, read-write, read-only


The list of pseudowires provides the following information about the pseudowires.

Run Command button—Select a pseudowire and click Run Command to perform an LSP Ping test checking the operation status of the pseudowire. The Diagnostics dialog box opens which displays a success or a failure message depending on the operation status of the pseudowire.