Configure Protocols (MPLS) Dialog Box


Use the Configure Protocols dialog box to configure protocols on devices for provisioning pseudowires.

Click Provisioning > MPLS/GRE Tunnels >Configure Protocols, then select MPLS from the Protocols drop-down list and click Open.




Device Name drop-down list box—Select the device on which you wish to configure the protocol.

Protocol drop-down list box—Select the prtocol (MPLS) and click Open.

Export button—Click this button to export the protocol in XML format.

Import button—Click this button to import protocols already configured and saved in XML format.

Enter Details for Protocol—Enter the details for the protocol:

Add button—Click this button to add protocol details.

Details of Protocol on Interface—Displays the details you have added.

Remove button—Select an interface and click Remove to remove that interface’s association with the protocol.

Remove All button—Click this button to remove all associations.

Save button—Click this button to save the details you have specified for the MPLS protocol.