Adding a User

You can enable users to perform certain Junos Scope operations. Each user must have a username, password, and permissions.

To add a user, follow these steps:

  1. In the Junos Scope main window, click Settings > Users > Local Authentication. The Local Authentication dialog box appears.
  2. Click Add. The Add User dialog box appears.
    Image user-local-authentication-add-user-dialog.gif
  3. In the Username text box, type the name of the user you want to add. The username can be up to 20 characters long.
  4. In the Password text box, type the user password. The user password should be between 6 and 128 characters long.

    A Junos Scope software password should meet the following restrictions:

    • Allow the full range of ASCII characters (except control characters).
    • Enforce a minimum of 6 characters.
    • Require a change in the character set, including uppercase, lowercase, numeric, and punctuation.
  5. In the Confirm Password text box, retype the user password to confirm it.
  6. In the User Groups drop-down list box, select one or more user groups for the user. Press Ctrl+click to select several user groups randomly. Press
    Shift+click to select several user groups in a row. For more information about user groups and permissions, see Predefined User Groups, User Group Permission Levels, and Permissions and Junos Scope Feature Access Privileges.
  7. Click OK.

    The new user is added to the Junos Scope software database and listed in the Users dialog box by username, access privilege level, and toolbox access level.

You can also add a user from the Junos Scope server using command-line interface (CLI) commands. To add a user, follow these steps:

  1. Login to the Junos Scope server and enter jtk/rc.d/cliutility and enter your username when prompted.
    user@host> jtk/rc.d/cliutility
    Please authenticate yourself
    User name:
    
  2. To add a user, enter the following command: add user –login “name” –password “password” –group < group >
    user@host>add user –login “username” –password “userpassword” –group administrator