Editing Authentication Information

To edit existing authentication information that has changed on a router, follow these steps:

  1. In the Junos Scope main window, click Settings > Authentication Information. The Authentication Information dialog box appears.
  2. Select the check box for the authentication information that you want to edit.
  3. Click Edit. The Edit Authentication Information dialog box appears.
    Image s001431.gif
  4. Edit the appropriate authentication information.
  5. Click OK. The edited authentication information is listed in the Authentication Information dialog box.

You can also change your password by clicking on the Change Password link located at the top right corner of the dialog box. To change you password, follow these steps:

  1. Click on the Change Password link located at the top right corner of the dialog box. The Change Password dialog box appears.
    Image s001531.gif
  2. Enter the new password in the Password field.
  3. Enter the same value in the Confirm Password field to confirm the new password.
  4. Click Submit to change your password or click Reset to reset the fields to their original values.

You can also change your password in the Junos Scope server using command-line interface (CLI) commands. To change your password, follow these steps:

  1. Login to the Junos Scope server and enter jtk/rc.d/cliutility and enter your username when prompted.
    user@host> jtk/rc.d/cliutility
    Please authenticate yourself
    User name:
    
  2. To change your password, enter the following command: change password “username” “newpassword”
    user@host>change password  “user1” “newpassword123”