Starting the Junos Scope Software Manually

The Junos Scope software is automatically started after you install or upgrade the Junos Scope software. If you stop the Junos Scope software, you can restart it using the following procedure.

To start the Junos Scope software after running the installation program, follow these steps:

  1. Type the following command:
    hostname% <install-directory>/jtk/rc.d/jtk start
  2. Connect to the Junos Scope software server and log in. For more information, see Connecting to the Junos Scope Software from a Client Workstation and Logging In .

If you reboot the UNIX workstation on which you installed the Junos Scope software, the Junos Scope software will not start automatically. For more information, see Starting the Junos Scope Software Automatically at Boot Time.