[Prev][Next][Report an Error]

Monitoring Process Details

The process details indicates the status of each of the individual processes running on the device. To view these details, select Monitor>System View>Process Details in the J-Web interface.

Alternatively, you can view chassis details by entering the following show commands in the CLI configuration editor:

Caution: Do not install a combination of PIMs in a single chassis that exceeds the maximum power and heat capacity of the chassis. If J-series power management is enabled, PIMs that exceed the maximum power and heat limits remain offline when the chassis is powered on. To check PIM power and heat status, use the show chassis fpc and show chassis power-ratings commands. For more information, see the J Series Services Routers Hardware Guide.

The Process Details page displays the following types of information for the entire device:

The Process Details page also displays the following types of information for each individual process running on the device::

[Prev][Next][Report an Error]